model: G-200
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 1,5 kW
model: P-200
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 1,5 kW
model: P-300
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 1,5 kW
model: P-300-4000
Length of arm: 3.000 mm
Radius of working area: 4.000 mm
Motor power: 1,5 kW
model: P-600
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 2,2 kW
model: P-900
Length of arm: 2.250 mm
Radius of working area: 2.250 mm
Motor power: 2,2 kW
model: T-200
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 1,5 kW
model: T-300
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 1,5 kW
model: T-600
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 2,2 kW
model: P-180
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 1,5 kW
model: T-180
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 1,5 kW

Liftarm E-Muskel G-200

model: G-200
Length of arm: 3.000 mm
Radius of working area: 3.000 mm
Motor power: 1,5 kW
Working pressure: Max. 13 mPA
Lifting speed: 20 Meter /Minute
Lifting capacity: 200 kg
Weight of machine: 400 kg
Electricity: 380 - 415 Volt, 50 Hz 3-Phase
Circular adjustment around column: 360
Circular adjustment around toolholder: 360
Eccentric load on toolholder: 1.000 Nm
.:
Standard Equipment:
Electro-hydraulic control system:
Bracket for lifting tools:
6-channel swivel for oil or air:
Slipring device with vacant poles at the control panel:
.:
Extras:
Hydraulic tool functions:
Column for mounting on the floor:
End switch for lifting- and lowering motion:
Brake for X- and Y-Movement with dead mans switch:
Servo-controlled X- und Y-Movement:
Swivel joint with unlimited rotation for electric and air connection:
 
roll_feeds Werkzeugwechsel ground conveyors PTT3 Coilhandling heavy load mainframe turning stations universal_transport_cart_type_1 coil_transport_carts_with_carrying_bolt Handlingsysteme Turning Station for Drive Shaft straighteners RM Handlingsysteme push_pull_unit_with_lifting_hydraulics Flow Production System Werkzeugwechsel push pull units PTT3 without pivot bearing without lifting hydraulics