Stationary Die Change Tables

T-shaped with motorized Die Movement

 
Stationary Die Change Tables usually are installed at the rear sides of the presses and built as a T-shape. 
 

This type of construction allows to the operator:

• to deliver in advance by overhead crane or forklift truck the next press
  die to be used and to park it at a parking position up to its use.
• to pull the press die, which is no longer used, out of the press and to
  park it at a parking position on the Die Change Table, until it will be transported.
• to push the earlier delivered new press die out of the parking position
  into the press.
• to pick up by overhead crane or forklift the press die which is at parking
  position and not any longer needed, after start up of the delivered new press die.
 

The stationary Die Change Table as T-shape is equipped with pneumatically operated die lifters with rolls, on which the press die will be lifted ready for movement. The die lifters with rolls are positioned within T-Slot-Housings, which are fixed on top of the Die Change Table. They are equipped with big rolls, which allow an easy moving of the press die. At parking position the rolls are lowered, which gives a very safe standing to the press dies and prevents them from rolling away. 

In case of Die Change Tables with motorized operation the press dies are moved motorized. This is done by the integrated die mover "Mark II" with hydraulical or pneumatical drive motor. With the Mark II the press dies can be moved into the press, out of the press or lateral to the parking positions. The motorized movement of press dies on die changing tables qualifies very good for heavy press dies. Details regarding the system "Mark II - Die Mover you will find on our Page "Die Mover"

You would like to optimize your die change procedures?
Please contact us and inform us about your corresponding press die data as well as information regarding installation situation. Together with You we would like to establish a proposal for improvement of press die changing situation. Surely we can transmit to you a very interesting offer.

 
If you will have questions regarding our motorized operated T-shaped Die Change Tables, we will be at your disposal for clarification at any time. Please do not hesitate to contact us:   

 

 

Phone:  +49 2156 419193
Fax:  +49 2156 4979325
Email:  info@seidel-handlingsysteme.de




 

blank stack turning station large sized_reels pneumatic_gripper_feeds_AVP Coilhandling industrial_trucks_with_pivot_bearing flatbed_transport_solution large sized_dual_decoilers flatbed_truck flatbed cart lines_for_strip_feeding coil_transport_trucks