Pneumatically operated Gripper Feeds

Series AVP, Customer-specific, for big Material Squares


The pneumatically operated gripper feeds of series AVP are built for feeding of coil material with a material thickness of up to 4,0 mm.
The gripper feeds of series AVP are, as you can see at the list below, available for processing of coil material with maximum material widths of 200 mm to 1.000 mm. The maximum possible feeding strokes, depending on the single model, are between 200 mm and 1.000 mm. 

Standard Configuration of the pneumatic Gripper Feeds of Series AVP:

• Press mounting plate
• Manual height adjustment + - 100 mm by long holes
• Machine stand with 4 legs
• Valve for opening of gripper for piloting function
• Manual adjustment of stroke length (in case of stroke lengths bigger 600 mm
  the maximum adjustable area is 600 mm)

Available Options:

• Protection housing for the gripper feed
• Maintenance unit for compressed air
• Plastic coated grippers for delicate materials
• Non-driven straightening device for material widths 200 / 300 / 400 / 500 mm

Let us have the requirement for the gripper feed searched by you. Basing on the listed standard versions plus optional accessories we can configurate your individual gripper feed. Any further adoptions, if requested, we would like to check and realise for you.

Please contact us by phone or email.

Tel.: 0049 2156 419193
Fax: 0049 2156 4979325

high lift carts for coil transport with carrying bolt conventional_lines_for_coil_feeding Werkzeugwechsel feeder straighteners Coilverarbeitung indoor_heavy_load_pallet_trucks strip_levelling_machine Advantage of Flow Production Schwerlasthandling coil_processing_lines push_pull_unit_PTT3_without_pivot_bearing_without_lifting_hydraulics flatbed_vehicle Werkzeughandling stack_of_blanks_turning_station Werkzeugwechsel